Precision Optical ClinometersOptical Clinometer AccessoriesMicrometer Drum ClinometersPendulum ClinometersLevelsSpirit Level VialsBall Type ClinometersHand Held ClinometersProtractorsElectronic Tilt SensorsAccuStar®AngleStar®SensorsClinometersDigital InclinometersShipboard Alignment SystemData Acquisition Computing System

TheodolitesSight ClinometerTelemetering TheodoliteObservation TheodoliteTheodolite Data Recording SystemTheodolite Automatic Tracking System20-8000 Common SpecificationsCeiling Light ProjectorCeiling and Pilot BalloonsBalloon Inflation KitPIBAL SystemExpeditionary Compact Meteorological Set Equipment

Alignment TelescopesAlignment AccessoriesOptical/Mechanical TheodolitesTheodolite AccessoriesStands and AccessoriesVertical TransitDigital Azimuth DeviceElectronic Compact Meteorological TheodoliteScales and AccessoriesEyepiece AdaptersInstrument AccessoriesTargets

Three Arm ProtractorsSighting CirclesSurvey and Navigational SextantsPrecision Surface LevelsTelescopic Marine AlidadesVertical Plumb AlignerBinocular CarriagesBoresights

Thermal CollimatorBoresightsJig TransitsTelescopesDioptometerMillidioptometerBeamsplitter/AdapterVideo Boresighting SystemsTelemetric Shipboard Alignment System

LasersMagnetic LocatorsMAC-51BxCompassesLevelsTransitsAlidadesTripodsOptical-Transit Levels

Check this out!

Three Arm Protractors

Optical/Mechanical Theodolites

Electronic Tilt Sensors

Specifications

29-8050A Machine Gun Alignment Boresight Similar to the system used in the boresight model 29-8050A, however this unit is used to align the 7.62 machine gun systems only. The boresight bracket replaces the machine gun for calibration of the system using the same mounting studs as the machine gun to obtain proper alignment.

Specifications

Mounted in an adjusting block, this boresight telescope can be used in a number of boresighting and table/plane applications. It can be used in the 7.72mm and 50 caliber machine gun alignment bracket, as well as in various sizes of other brackets and fixtures custom designed for your optical tooling application.

Specifications

These fixtures were designed to hold the boresight model 29-9135 and provide a method to align a long platform or any surface which requires a precise alignment of preset points at increments along its entire length.

Specifications

This telescope is held generally by a bracket or v blocks. This telescope screws onto and sights through cross wires fitted into the fixture openings.

Specifications

These loading boresights are used to align 90mm, 105mm, 120mm gun tubes without removal of any of the gun components for proper alignment. This design is also used in many commercial applications, such as tube, internal bushing, critical rod and shaft positioning.

Specifications

Similar to the system used in the boresight model 29-8050A, however this unit is used to align the 7.62 machine gun systems only. The boresight bracket replaces the machine gun for calibration of the system using the same mounting studs as the machine gun to obtain proper alignment.