Specifications

The all new Pro Shot L4.7 combines one person alignment and elevation checking with capabilities equal to systems that cost far more. No other laser in its price range offers vertical capability, or can come close to matching the L4’s operating radius. Out affordable extra receivers can increase your productivity for far less than other brands. On top of all this, the L4 offers the industry leading Guardian 36 month warranty

The L4 (also available with visible beam, see the L4+ below) compensated laser level is the choice of the general and commercial concrete contractor. In the horizontal mode, it self levels via a wire hung, air damped compensator. It is manually aligned and plumbed when used in the vertical mode. Note that the laser must be paired with the optional W1 mount to be used in the vertical mode. The L4 has a long working radius of 750 feet (230m), with leveling accuracy of ±3/32 inch per 100 feet (2.4mm per 30m). Run time on 4 C alkaline batteries is 70 hours, or approximately 24 hours on the optional rechargeable batteries. Featuring our 3 year Guardian warranty and the most competitive price in the industry, the L4 is an unbeatable choice.

Detailed Description

Features

Specifications

Specifications

The L4+ is a top choice for commercial ceiling, drywall, and interior contractors. It functions in the same manner as the L4, but it sports a high power visible beam and a fixed plumb beam. Like the L4, the L4+ self levels via a wire hung compensator, and is manually plumbed and aligned in the vertical mode. The fixed plumb beam is useful for transferring points from floor to ceiling (used with the P1 Plumb Plate), or for turning 90 degree angles.

The transmitter has a working radius of 750 feet (230m) when used with the optional R5 receiver and accuracy of 3/32 inch per 100 feet (2.4mm per 30m). If you review the market for self leveling visible beam lasers, you will conclude that the L4+ sets new standards for performance and affordability. 3 Year Guardian Warranty.

Detailed Description

Features

Specifications

Specifications

The MC-1 is a self contained laser receiver and visual display that is designed for use on a backhoe or trencher. It enables the machine operator to take elevation readings from the the control seat. The electronics are housed in a heavy duty aluminum extrusion, and provide 8 inches (205mm) of receiving height in a 120 degree arc.

The bright LED grade display can be seen at a distance, and provides 5 channels of information, high, high fine, on grade, low fine, and low. Controls consist of an on/off switch, and a switch to control the brightness of the LED display. The MC-1 will run for approximately 200 hours on 4 C alkaline batteries, or 70 hours on optional rechargeable Ni-Cds. The unit mounts to the stick of the backhoe with a section of steel channel and 4 weld on tabs. (Shown on MG1 magnetic mount.) 3 Year Guardian Warranty.

Detailed Description

Features

Specifications

Specifications

No more tape measures or roller-wheels! Use the Advantage to measure distances WITHOUT reflective targets! Just point and shoot to obtain instantaneous distance measurements to non-cooperative targets in feet, yards or meters.And remember, only Laser Atlanta offers the unique Head-Up-Display!

Key Benefits

• Class I eyesafe
  
• Unique Head-Up-Display allows simultaneous viewing of target and data in real time
  
• Range can be measured and recorded in feet, yards, or meters.
  
• Measure distances to 2,000 feet without reflective targets or prisms.
  
• Range to 30,000 feet with reflective targets.
  
• Easy to use auto-compute functions can automatically calculate heights, widths, 3D missing lines, areas and more. You can calculate where the guy wire should attach on utility poles!
  
• Easy-to-use menu guides you through applications and user settings.
  
• Plug-and-play compatible with GPS systems, data recorders and mapping software. Stand in a remote point to obtain otherwise impossible to reach GPS points.
  
• Two self-contained, rechargeable ni-cad battery handles provide over ten hours of use per charge.
  
• Flexible data storage via RS-232 serial data port or PCMCIA memory cards.
  
• A rugged, lightweight system that comes complete with a one year warranty on parts and labor (excludes batteries, software.)
  
• Online Advantage manual in .pdf format

Laser Wavelength: 904nm Beam Divergence: 3 mrad Classification: Class I (21 CFR 1040.10 and 1040.11) Acquisition Time 1/3 second Distance Measurement Reflectorless: 1.5m to 610m / 5 ft. to 2,000ft. Reflector: 1.5m to 9,144m / 5ft. to 30,000ft. Accuracy ± 15.3 cm / ±6 in. Resolution 0.01 m / 0.1 ft. Compass Measurement Type: Strapped Down Magnetometer Range: 0.0° to 359.9° Accuracy: 1.0°RMS level (1.5°RMS when tilted) Repeatibility: ±0.3°

Displays Rear Panel: 4 line x 20 character LCD HUD: LED aiming crosshair and 1 line x 4 character LED Communications Type: RS-232 Serial Data Data Recording PCMCIA Type II SRAM Cards, DOS format Power Supply Ni-Cd rechargeable battery Optional 12V power adapter Operating Temperature -40C to 176C (-22F to 140F) Environmental Water resistant Dimensions W11.5 x H21.5 x D19 cm W4.5 x H8.5 x D7.5 in. Weight 1.0kg / 4.5lb (with battery)

Detailed Description

Features

Specifications

Specifications

Detailed Description

Features

Specifications

Specifications

Detailed Description

Features

Specifications