Precision Optical ClinometersOptical Clinometer AccessoriesMicrometer Drum ClinometersPendulum ClinometersLevelsSpirit Level VialsBall Type ClinometersHand Held ClinometersProtractorsElectronic Tilt SensorsAccuStar®AngleStar®SensorsClinometersDigital InclinometersShipboard Alignment SystemData Acquisition Computing System

TheodolitesSight ClinometerTelemetering TheodoliteObservation TheodoliteTheodolite Data Recording SystemTheodolite Automatic Tracking System20-8000 Common SpecificationsCeiling Light ProjectorCeiling and Pilot BalloonsBalloon Inflation KitPIBAL SystemExpeditionary Compact Meteorological Set Equipment

Alignment TelescopesAlignment AccessoriesOptical/Mechanical TheodolitesTheodolite AccessoriesStands and AccessoriesVertical TransitDigital Azimuth DeviceElectronic Compact Meteorological TheodoliteScales and AccessoriesEyepiece AdaptersInstrument AccessoriesTargets

Three Arm ProtractorsSighting CirclesSurvey and Navigational SextantsPrecision Surface LevelsTelescopic Marine AlidadesVertical Plumb AlignerBinocular CarriagesBoresights

Thermal CollimatorBoresightsJig TransitsTelescopesDioptometerMillidioptometerBeamsplitter/AdapterVideo Boresighting SystemsTelemetric Shipboard Alignment System

LasersMagnetic LocatorsMAC-51BxCompassesLevelsTransitsAlidadesTripodsOptical-Transit Levels

Check this out!

Three Arm Protractors

Optical/Mechanical Theodolites

Electronic Tilt Sensors

Specifications

Vertical Transit Model #10-0701A-VT This instrument is designed to provide a means to independently establish the sighting and pointing accuracy of an automatic tracking or other radar systems. This is accomplished by tracking an aircraft over the transit sight with the transit and the radar system simultaneously. The transit determines the actual fly-over path of the aircraft which is compared with the path position information provided by the radar system. If any differences appear, then the radar system is adjusted to coincide with the coordinates determined by the vertical transit. This instrument has a right angle telescope to allow the observer to track a target as it passes overhead. The telescope to allow the observer to track a target as it passes overhead. The telescope has an erect image, magnification of 8X and field of view of 8 degrees and 45 minutes. The reticle is photo etched, with divisions every 5 mils, numbered every 10 mils for a total of 70 mils on each side of center both on vertical and horizontal axis. Reticle center is coincident with instrument optical axis and azimuth axis with +/-1 mil.

Direct all inquires to theodolites@warrenind.com.

Detailed Description